The TVGUYSat dish (SP75) has been a stock item of our supplier for over 8 years and over that time, thousands have been sold.  They've been used all over Australia from Burnie to Bamaga and beyond.  The SP75 measures 75cm across and 83cm top to bottom.  It features a rolled edge for extra strength and is zinc coated then painted.

The rear bracket is the best design with a single wingnut to loosen to adjust the elevation of the dish.  We've always favoured this design as opposed to other brands like Azure Shine or Triax with their over complicated mechanism and difficult to read elevation scale.  There's even a plastic retaining clip to hold the U bolts together and stop the dish from sliding down the mast while you're sorting out the alignment.

For quick set up and pack up, the front LNB arm can be easily removed by loosening the knob on the rear of the dish.

An included padded dish bag is provided for this dish and protects all of the components.  It has internal pockets for the small components, padding all round and enough room to store the cables too.

A sturdy tripod is included which has adjustable legs for uneven ground, bubble level and peg holes in the feet.  This weighs about 4.5KG and packs down to 600mm. 

Setup and ready to go, the TravelSat dish with tripod will look like this.

The LNB (amplifier on the front of the dish) is compatible with Austar and Foxtel and has a single output.  This is suitable for all standard pay TV boxes and is included in this kit.  However, if you have MyStar or Foxtel IQ, you will require a twin output LNB with 2 cables coming from the dish and connected to your MyStar or Foxtel IQ decoder inside the van.   If so, let me know when ordering. 

WHAT'S INCLUDED?

SATELLITE METER

You'll need to align your satellite dish to the satellite and to do this we include a  digital satellite meter. With this meter you WILL hit the right satellite the first time.  Switch on the meter, turn the dish until the meter indicates SATFOUND and the beeper is sounding.  Done !   The digital satellite meter has an inbuilt, rechargeable lithium battery so you can position the dish while connected to the 3240 meter and align it first, then connect the coaxial cable from the van.  The Meter features an LCD display that alerts you both visually and audibly when the satellite has been found.

COAXIAL CABLE

For standard single tuner Foxtel or Austar decoders you'll require:

• A short cable for the dish to connect to the meter
• 10m cable from the dish to the caravan wall
• Internal 1m cable from the inside wall to the decoder

For twin tuner Foxtel or Austar decoders you'll require:

• a short twin cable for the dish t0 connect to the meter
• twin 10m cable from the dish to the caravan wall
• twin internal 1m cable from the inside wall to the decoder

WEATHERPROOF WALLPLATE

You'll need a way to connect that external coaxial cable in through your van wall.  We can supply our EziPlate weatherproof wall fitting that is easy and neat to install.  The EziPlate can adjust to wall thicknesses up to 35mm and is a direct, no loss connection from outside to in.  You may already have something similar but unless it is a direct connection from outside to in with no joins or splitter in between then it will not work.  

A concise TVGUYSat manual can be included to guide you through the alignment process.

• Availability: In Stock