Search
Search Criteria
Products meeting the search criteria
The TVGUYSat dish (SP75) has been a stock item of our supplier for over 8 years and over that time, thousands have been sold. They've been used all over Australia from Burnie to Bamaga and beyond. The SP75 measures 75cm across and 83cm top to bottom. It features a rolled edge for extra strength and is zinc coated then painted.
The rear bracket is the best design with a single wingnut to loosen to adjust the elevation of the dish. We've always favoured this design as opposed to other brands like Azure Shine or Triax with their over complicated mechanism and difficult to read elevation scale. There's even a plastic retaining clip to hold the U bolts together and stop the dish from sliding down the mast while you're sorting out the alignment.
For quick set up and pack up, the front LNB arm can be easily removed by loosening the knob on the rear of the dish.
An included padded dish bag is provided for this dish and protects all of the components. It has internal pockets for the small components, padding all round and enough room to store the cables too.
A sturdy tripod is included which has adjustable legs for uneven ground, bubble level and peg holes in the feet. This weighs about 4.5KG and packs down to 600mm.
Setup and ready to go, the TravelSat dish with tripod will look like this.
The LNB (amplifier on the front of the dish) is compatible with Austar and Foxtel and has a single output. This is suitable for all standard pay TV boxes and is included in this kit. However, if you have MyStar or Foxtel IQ, you will require a twin output LNB with 2 cables coming from the dish and connected to your MyStar or Foxtel IQ decoder inside the van. If so, let me know when ordering.
WHAT'S INCLUDED?
SATELLITE METER
You'll need to align your satellite dish to the satellite and to do this we include a digital satellite meter. With this meter you WILL hit the right satellite the first time. Switch on the meter, turn the dish until the meter indicates SATFOUND and the beeper is sounding. Done ! The digital satellite meter has an inbuilt, rechargeable lithium battery so you can position the dish while connected to the 3240 meter and align it first, then connect the coaxial cable from the van. The Meter features an LCD display that alerts you both visually and audibly when the satellite has been found.
COAXIAL CABLE
For standard single tuner Foxtel or Austar decoders you'll require:
- A short cable for the dish to connect to the meter
- 10m cable from the dish to the caravan wall
- Internal 1m cable from the inside wall to the decoder
For twin tuner Foxtel or Austar decoders you'll require:
- a short twin cable for the dish t0 connect to the meter
- twin 10m cable from the dish to the caravan wall
- twin internal 1m cable from the inside wall to the decoder
WEATHERPROOF WALLPLATE
You'll need a way to connect that external coaxial cable in through your van wall. We can supply our EziPlate weatherproof wall fitting that is easy and neat to install. The EziPlate can adjust to wall thicknesses up to 35mm and is a direct, no loss connection from outside to in. You may already have something similar but unless it is a direct connection from outside to in with no joins or splitter in between then it will not work.
A concise TVGUYSat manual can be included to guide you through the alignment process.
The Orbit has a 85CM high gain dish to provide coverage for VAST & Foxtel Australia wide. Just press OK, simple.
Utilising the latest in GPS technology to locate your exact location, the Orbit will quickly locate the desired satellite signal.
The SatKing Orbit is built for harsh Australian conditions, it’s rugged, well made with all metal drive gears. Designed in Australia and produced in Korea, the unit is perfect for travelling off the beaten track.
The Orbit represents great value for money and is big on features but low on cost.
The SatKing Orbit is backed with a 2 year Australian warranty and fully supported by SatKing, a big Australian-owned company. Need assistance or help whilst on the road? Don’t worry, we have a 1300 helpline to assist you on your travels.
TV Satellite Dish For Caravan
RRP: $2395.00
The Satking TV Satellite Dish For Caravan is the latest and fully automatic Satellite dish to hit the Australian market. No need to manually dishes on the ground to watch TV anymore. Simply combine this system with a VAST or Foxtel Satellite receiver and you will be watching TV anywhere in Australia within 80 seconds.
Our Caravan Satellite Dish Advantage
The SatKing Orbit TV Satellite Dish for Caravan has a 85CM high gain dish to provide coverage for VAST & Foxtel Australia wide. Just press OK, simple.
Utilising the latest in GPS technology to locate your exact location, the SatKing Orbit will quickly locate the desired satellite signal.
The SatKing Orbit is built for harsh Australian conditions, it’s rugged, well made with all metal drive gears. Designed in Australia and produced in Korea, the unit is perfect for travelling off the beaten track.
The SatKing Orbit is backed with a 2 year Australian warranty and fully supported by SatKing, a big Australian-owned company. Need assistance or help whilst on the road? Don’t worry, we have a 1300 helpline to assist you on your travels.
Australia wide coverage of VAST and Foxtel Satellite TV
The Satking Orbit TV Satellite Dish For Caravan has recently had a coverage area upgrade for VAST Satellite TV and Foxtel Satellite TV around Australia. SatKing Orbit has provided a map to show the coverage area.
The TVGUYlSat dish (SP75) has been a stock item of our supplier for over 8 years and over that time, thousands have been sold. They've been used all over Australia from Burnie to Bamaga and beyond. The SP75 measures 75cm across and 83cm top to bottom. It features a rolled edge for extra strength and is zinc coated then painted.
The rear bracket is the best design with a single wingnut to loosen to adjust the elevation of the dish. We've always favoured this design as opposed to other brands like Azure Shine or Triax with their over complicated mechanism and difficult to read elevation scale. There's even a plastic retaining clip to hold the U bolts together and stop the dish from sliding down the mast while you're sorting out the alignment.
For quick set up and pack up, the front LNB arm can be easily removed by loosening the knob on the rear of the dish.
An included padded dish bag is provided for this dish and protects all of the components. It has internal pockets for the small components, padding all round and enough room to store the cables too.
A sturdy tripod is included which has adjustable legs for uneven ground, bubble level and peg holes in the feet. This weighs about 4.5KG and packs down to 600mm.
Setup and ready to go, the TravelSat dish with tripod will look like this.
The LNB (amplifier on the front of the dish) is compatible with Austar and Foxtel and has a single output. This is suitable for all standard pay TV boxes and is included in this kit. However, if you have MyStar or Foxtel IQ, you will require a twin output LNB with 2 cables coming from the dish and connected to your MyStar or Foxtel IQ decoder inside the van. If so, let me know when ordering.
WHAT'S INCLUDED?
SATELLITE METER
You'll need to align your satellite dish to the satellite and to do this we include a digital satellite meter. With this meter you WILL hit the right satellite the first time. Switch on the meter, turn the dish until the meter indicates SATFOUND and the beeper is sounding. Done ! We dont sell our sat systems with the basic needle and tone finder and always supply a digital meter as it simplifies the entire process. The meter features an LCD display that alerts you both visually and audibly when the satellite has been found.
VAST DECODER.
The VAST (Viewer Access Satellite Television) is undoubtedly one of the best decoders for use in a caravan and motorhome. Its small size and low power consumption makes it well suited for RV use. 12V and 240V operation coupled with features like PVR ready (recording direct to an external USB drive), easy to use on-screen menus, HDMI output and more. You'll get access to the complete range of free to air Australian TV channels anywhere in Australia. Bonus HDMI cable is included to connect to your TV.
12V CIGARETTE LEAD
The VAST decoder comes complete with a 240V power supply and BONUS 12V lead.
COAXIAL CABLE
For standard single tuner Foxtel or Austar decoders you'll require:
- 10m cable from the dish to the caravan wall
- Internal 1m cable from the inside wall to the decoder
For twin tuner Foxtel or Austar decoders you'll require:
- twin 10m cable from the dish to the caravan wall
- twin internal 1m cable from the inside wall to the decoder
WEATHERPROOF WALLPLATE
You'll need a way to connect that external coaxial cable in through your van wall. We can supply our EziPlate weatherproof wall fitting that is easy and neat to install. The EziPlate can adjust to wall thicknesses up to 35mm and is a direct, no loss connection from outside to in. You may already have something similar but unless it is a direct connection from outside to in with no joins or splitter in between then it will not work.
Flat Panel Design
The SatKing ProMax Fully automatic motorised satellite TV dish system is the most advanced system on the Australian market, utilising the latest in flat panel antenna design.
The flat panel design receives the signal through small copper slots that act like many antennas in one. The signal is fed through small chambers that actually increase the signal gain through this process. The antenna arrays are then mixed together via a combiner and fed into the high performance rear mounted LNB, resulting in greatly increased gain.
Flat panel satellite antennas also take up a great deal less space on the roof of your van leaving you with more choices for the exact location that you place the ProMax on your roof. You will be able to place the ProMax in between solar panels and air conditioners and even position the unit directly above a cupboard to easily drop cables in.
Flat panel satellite TV antennas offer higher signal gain than many larger oval offset oval type satellite TV dishes. The increased gain is also related to not having the large arm out the front of the dish that can easily become not accurately aligned as you bounce along the road resulting in reduced accuracy (less gain). This design means the Pro Max will provide Australia wide coverage for VAST & Foxtel.
The ProMax is also not effected by wind like the larger old style oval dishes that pixelate when the winds blows. The unit does also not need to be retracted in high winds like the large oval dishes.
The SatKing ProMax has 3 motors meaning the old days of having to manually get up on the roof of the van to adjust LNB skew (turning the LNB clockwise or anti clockwise) when you are travelling from say Melbourne across to Adelaide and then to Perth are gone. The complete head of the ProMax simply adjusts automatically for you. The precise automatic skew with this unit will also improve the signal quality in low signal areas.
Simple To Use
The SatKing ProMax is very simple to use, simply turn the unit on, select the sateelite you wish the view and press "OK". The unit will then locate your position and set the elevation and skew angle automatically via the GPS and then locate the direction all within 80 seconds. Your VAST set top box will then load your channels and land on your last watched channel or channel 800. For Foxtel the STB will load the program guide listing and resume on the last watched channel, easy.
Installation is easy, simply select the location of your choosing apply Sikaflex to the underside of the mounting plate and then fix the plate to the roof and screw the mounting plate into a beam in the roof of the van, the Promax then simply fits on to the mounting plate with just 4 nuts. Connect the 3 cables and connect the power to the controller inside the van and turn the unit on, job done.
Please watch this video for more details on the install of the unit.
Watch TVBuilt in GPS
The built in 24 channel GPS allows the ProMax to know your exact location, the unit is not just simply searching the sky trying to find a signal. Knowing your exact location allows the unit to pre-set the skew and elevation angles making locating the signal much easier. Then once the satellite is found the unit with then automatically fine tune both the skew and elevation to achieve the highest signal level.
The built in GPS also will detect if you have left the unit up when your driving and automatically retract if the unit is powered
Pre-Programmed to receive VAST and Foxtel/Austar
This motorised satellite system suits Foxtel and VAST satellite TV. The unit has dual LNB outputs to suit twin tuner STB’s like Foxtel IQ/Austar MyStar and VAST twin tuner receivers.
The Promax can receive both DVBS and DVBS2 transponders (SD & HD MPEG4), this means the Promax can actually tune to all transponders available on both Optus C1 and D3. The added bonus of having the DVBS2 tuner already built in is that when Foxtel goes completely MPEG4 the Promax will continue to work (VAST is already MPEG4). Many other automatic systems on the market only can tune to the older MPEG2 signals, that is fine today but in the future you will have and expensive system just spinning around and around.
Numerous Applications
The ProMax has many other applications for satellite TV. The ProMax is used on mining and 4WD vehicles when overnight stays are required in remote areas so contractors can watch TV when work is finished for the day.
There is also a ProMax currently being used on one of the new kidney buses that head to regional area's to give patients dialysis without heading to a major towns. More of these buses are being rolled out.
The ProMax is also used in outback area's where it is not possible to get a satellite technician to attend due to distance, simply un-pack from the box plug into 12VDC and plug in your VAST receiver and watch TV in just minutes. Or you may simply be camping where there is no terrestrial TV, place the unit on the ground with a clear view to the north and power up, connect up your VAST STB and be watching satellite TV within minutes.
Made for harsh Australian conditions
The SatKing ProMax is precision made for Harsh Australian conditions, it is rugged in construction with all main drive gears being metal for long life. The unit is backed with a 3 year Australian warranty. The unit is made in Korea. Korea is famous for making high quality and latest technology products.
Features Overview
- Fully automatic self aligning
- Pre-Programmed to receive VAST and Foxtel/Austar
- Flat panel design offers compact size with big performance
- Dual output LNB as standard to suit twin tuner STB’s
- Built in 24 Channel GPS to find satellites fast
- Not affected by wind like the large round dishes that need to be retracted when windy and cause picture break up's when the wind blows
- Last position memory to save on search times
- Suitable for Caravan, motorhome, motor vehicle and camping use
- Automatic retraction when you exceed 10KPH, unit must be powered
- Automatic LNB skew
- Powerful DC motors with metal gears
- Can be self installed, detailed instructions and roof mount included
- 3 Year warranty
- 1300 Number help line (with no answering machine)
- Made for harsh Australian conditions
- Requires less roof area than conventional dish antenna's with a big arm, so you can position the unit where you want on the roof of the van
- Made in Korea
- Not affected by wind like the large round dishes that need to be retracted when windy and cause picture break up's when the wind blows
Description:
The SatKing SK-3200 is digital satellite Finder specially designed for VAST satellite TV. Being MPEG 4 the unit has been pre-programmed with the VAST paraFinders pre-set making the Finder very easy to use. If the other Finders you find just say digital they are not MPEG4 so they will not last. Simply plug the unit in to the dish and use the signal level bars to align you dish and once the level bars go green and the signal beeper is sounding the dish is aligned correctly and you are on the correct satellite. Then plug the antenna cable into your vast receiver or Foxtel STB and it will scan the channels in for you. The unit has a built in high power battery so the unit does not need to be connected to the VAST receiver to be used. Unlike many other lower priced Finders on the market this Finder you can actually receive VAST transponders. Many other mid lower cost Finders you are actually just receive the signal from the MPEG2 format and this could end anytime rendering your Finder useless. Special Note: All VAST services are MPEG4, there are no VAST MPEG2 services. If you have Foxtel and think this Finder sounds perfect for you well it is, you can simply align your dish on the VAST settings or simply select TP 3 in the sat setting menu and the unit will receive the actual Foxtel signal.
Features:
- VAST Compliant
- MPEG4
- 2.4” Colour LCD Screen
- Built in Speaker
- Built in Light
- Signal buzzer
- Built in Compass
- Satellite Alignment Tool built in
- 800MAh Lithium Ion Battery
- Software Upgrade via mini USB
- Compact Size
- Signal Too Noise Display
- BER Display
- dBuV Display
- dBm Display
Technical Specifications:
- Signal Level: 25 to -65dBm
- L.O: 10,000-12,000 GHz
- Satellite Input: 1x F-Type
- LNB Power: 13/18V
- 22KHz: Yes
- Diseqc: No
- Voltage Input: 12VDC
- Symbol Range 2-45,000
- Video Encoding: MPEG2/MPEG4
- Audio: MPEG-1 Layer II , MPEG4 HE-AAC v2
Packages:
- 1x Finder
- 1x 240v/12V Power Pack
- 1x Case, 1x Strap
- 1x Battery 800MAh
- 1x Gift Box
- 1x F-Male Sat Input
- 1x Mini USB
- 1x 2.1mm DC Jack
- 1